Turtle Wax – Headlight Lens Restorer

This unique process restores dull, yellowed headlights to like-new condition in less than 5 minutes per lens.

Unique process restores dull, yellowed headlights to like-new condition, Lens Clarifying Compound quickly removes surface discoloration and may be all that is needed to restore clarity
3 multi-stage wet restoration pads focus on deeper discoloration and scratches to restore the lens to like-new condition, New sealing wipe helps protect from future yellowing and discoloration

How do I use it?

Wash headlight lens to remove surface dirt.
If lens to be restored is next to painted surfaces, use masking tape to protect the paint.
Apply Lens Clarifying Compound to a cotton cloth. Rub compound over the entire lens using firm pressure. Buff with clean terry cloth. Restore only one lens at a time. If the lens does not come clean with Lens Clarifying Compound, proceed to Step 4.
Apply Spray Lube to Level 1 pad (green pad) and to the lens to be restored. Use pads on only those areas requiring restoration. Begin rubbing the Level 1 pad, using firm finger pressure, in a back and forth motion over the lens, continuing until much of the oxidation is removed. Use the Spray Lube as necessary to keep the lens and pad wet. The green Level 1 pad will require the longest use.
Immediately switch to the Level 2 pad (brown). Rub back and forth in the opposite direction (90 degrees) of the Level 1 pad for about 1 minute, keeping the pad and lens surface wet using the Spray Lube. Switch to the Level 3 side of the final pad (purple) and repeat the process for 1 minute. Flip to the Level 4 side of the final pad (blue) and repeat the process for 1 minute.
Dry the lens with a cotton towel. Lens Clarifying Compound and rub thoroughly back and forth until the lens clarifies. Let the compound dry to a haze and buff with a cotton cloth. Lens Clarifying Compound can be applied by machine with a foam pad at 1500 RPMs.
Apply a high-quality vehicle wax, such as Turtle Wax® Super Hard Shell® paste or liquid wax, to seal and protect the lens.

Kit includes:

3 x restoration pads of various grits from 2400 to 8000 grit,
1 x Spray Lubricant (4 oz.),
1 x Lens Clarifying Compound (4 oz.) and Lens Sealing Wipe (4″x4″)